|
Standard Hard Hat
- Meets ANSI/ISEA Z89.1-2009, Type I, Class E & G requirements
- 6-point suspension
- Pillowed brow pad
- 1” wide seamless nylon crown straps
- Front and rear vertical height adjustments
- Accessory slots accept a wide variety of attachments
- Suspension snaps in with an audible click – users know it’s assembled correctly
- Available in blue, orange, red, white or yellow
|
|
Elevated Temperature Hard Hat
- Meets ANSI/ISEA Z89.1-2009 Type I, Class E
- CSA Z94.1-2005 Class E requirements
- Can withstand radiant heat up to 275°F (135°C)
- Available in blue, white or yellow
|
|
Premium Hearing Protection
- For noise levels up to 105 dBA
- Liquid/foam filled earmuff cushions
- Stainless steel headband distributes weight for low-pressure fit
- Noise Reduction Rating (NRR) 30 dB. CSA Class AL
- Bright lime green for high visibility in critical areas
|
|
Economy Hearing Protection
- Noise Reduction Rating NRR 20 dB (CSA class B) when the band is worn over-the-head
- NRR 22 dB (CSA Class A) when the band is worn under-the-chin
- NRR 22 dB (CSA Class B) when band is worn behind-the-head
- Large earcup openings and soft, foam-filled cushions offer a snug, comfortable fit
- Durable, lightweight construction of non-conductive, dielectric plastic
|
|
Premium Protective Eyewear
- Meets high impact ANSI Z87.1-2003 requirements
- Brown Anti-fog lenses
- Dark copper frame
- Polycarbonate lens absorbs 99.9% UV
- Includes microfiber bag and lanyard
|
|
Economy Protective Eyewear
- Meets CSA Z94.3-2007 and high impact
- ANSI Z87.1-2003 requirements
- Features integrated ear plugs
- Clear hard coat lens
- Polycarbonate lens absorbs 99.9% UV
- Includes microfiber bag and lanyard
|
|
Premium Work Gloves
- Mesh-backed glove with sure-grip palm for wide range of tasks.
- Breathable, polyester hi-vis Air-Mesh back
- 3M™ reflective tape zones on back
- Durable synthetic leather palm
- Abrasion resistant, textured PVC on palm and fingers
- Breathable neoprene cuff with low-profile closure
- Terry thumb brow wipe
|
|
Economy Work Gloves
- Foamed PVC coating is soft and flexible enough to provide a degree of shock and vibration absorption, but tough enough to offer abrasion resistance comparable to polyurethane.
- The back of the glove is un-coated, for ventilation and wearer comfort
- Launderable for added value and longer life
|