 |
Standard Reaction Arm
All of our tools are supplied with standard reaction arms, however additional
replacements are available
• Rated at 1,400 ft-lbs
• Simple 1 pin and 1 set screw installation
• Fits any tool or extension spline
• Hardened chrome moly steel construction
• Black oxide finish
• Made in USA
• 1 yr warranty |
 |
Custom Reaction Arm
Aside from standard reaction arms our tools can also be used with customized reaction arms that we can design and fabricate – just click “contact us” or call your sales representative
• Rated at 1,400 ft-lbs
• Simple 1 pin and 1 set screw installation
• Fits any tool or extension spline
• Hardened chrome moly steel construction
• Black oxide finish
• Made in USA
• 1 yr warranty |
 |
Reaction Arm Weld Blanks
These reaction arm blanks enable our customers to design and fabricate their
own reaction arms
• Rating is based on design and fabrication
• Simple 1 pin and 1 set screw installation
• Fits any tool or extension spline
• Unhardened chrome moly steel construction – requires heat treating after welding
• No finish
• Made in USA
• No warranty |
 |
18" Extension
• Fits all TORQ Fusion® tools
• Fits all TORQ Fusion® reaction arms
• Fits all TORQ Fusion® square drives
• 1 screw installation
• Weighs 9.1 lbs (4.1 Kg)
• Does not affect tool torque performance
• Made in USA
• 1 yr warranty |
 |
12" Extension
• Fits all TORQ Fusion® tools
• Fits all TORQ Fusion® reaction arms
• Fits all TORQ Fusion® square drives
• 1 screw installation
• Weighs 6.9 lbs (3.1 Kg)
• Does not affect tool torque performance
• Made in USA
• 1 yr warranty |
 |
6" Extension
• Fits all TORQ Fusion® tools
• Fits all TORQ Fusion® reaction arms
• Fits all TORQ Fusion® square drives
• 1 screw installation
• Weighs 4.6 lbs (2.1 Kg)
• Does not affect tool torque performance
• Made in USA
• 1 yr warranty |
 |
Wheel Attachment
• Specifically designed for truck and off-road equipment wheel bolting
• Fits all TORQ Fusion tools except 2600 models
• ¾” square drive
• Rated at 1,400 ft-lbs
• 2 screw installation
• Weighs 5 lbs (2.3 Kg)
• Made in USA |
 |
Replacement Battery
• Geniune Makita® battery
• 18V Li-Ion technology
• Fits all TORQ Fusion battery tools
• 4.0 Ah capacity provides an estimated 260 bolting cycles at 80% tool capacity and 200 bolting cycles at 100% tool capacity |
 |
Battery Charger
• Genuine Makita® battery charger
• 18V Li-Ion technology compatible
• Fully charges a 4.0 Ah battery in 40 min
• Fully charges a 3.0 Ah battery in 30 min
• Operates on 110 VAC, 50-60 Hz
• 220 VAC chargers available
• Max power consumption 240 W |
 |
Small Battery Tool Storage Case
• Blow molded polyethylene construction
• Precision cut high density polyethylene foam provides uniform support for contents
• Fits 1 GT200EBS, GT500EBS, GT800EBS or GT1300EBS tool with standard reaction arm and square drive
• Fits 2 Makita® 18V Li-Ion batteries
• Fits 1 Makita® DC18RC battery charger
• Fits 1 additional ¾” or 1” square drive
• Heavy-duty latches
• Great for storage or shipping
• Made in USA |
 |
Large Battery Tool Storage Case
• Blow molded polyethylene construction
• Precision cut high density polyethylene foam provides uniform support for contents
• Fits 1 GT200EBS, GT500EBS, GT800EBS, GT1300EBS or GT2600EBS tool with standard reaction arm and square drive
• Fits 2 Makita® 18V Li-Ion batteries
• Fits 1 Makita® DC18RC battery charger
• Fits additional standard reaction arm
• Fits 1 additional ¾” or 1” square drive
• Heavy-duty latches
• Great for storage or shipping
• Made in USA |
 |
Small Pneumatic Tool Storage Case
• Blow molded polyethylene construction
• Precision cut high density polyethylene foam provides uniform support for contents
• Fits 1 GT200PSS, GT500PSS, GT800PSS or GT1300PSS tool with standard reaction arm and square drive
• Fits 1 additional ¾” or 1” square drive
• Heavy-duty latches
• Great for storage or shipping
• Made in USA |
 |
Large Pneumatic Tool Storage Case
• Blow molded polyethylene construction
• Precision cut high density polyethylene foam provides uniform support for contents
• Fits 1 GT200PSS, GT500PSS, GT800PSS, GT1300PSS or GT2600PSS tool with standard reaction arm and square drive
• Fits additional standard reaction arm
• Fits 1 additional ¾” or 1” square drive
• Heavy-duty latches
• Great for storage or shipping
• Made in USA |
 |
GT Standard 3/4" Square Drive
• Rated at 1,400 ft-lbs max torque
• Recommended for GT500PSS, GT500PSS Wheel Edition and GT800PSS
• Compatible with all extensions
• Field replaceable with 1/8” hex key
• Weighs 0.4 lbs
• Made in USA |
 |
GT Standard 1" Square Drive
• Rated at 1,400 ft-lbs max torque
• Recommended for GT800PSS and GT1300PSS
• Compatible with all extensions
• Field replaceable with 1/8” hex key
• Weighs 0.4 lbs
• Made in USA |
 |
Pneumatic Tool Oil
• Protects the life of your torque wrench
• Recommended for all GT-series tools
• Ensures smooth starts and long motor life
• Dissolves gum and sludge
• Prevents corrosion
• 32 oz (0.94 L) |
 |
Accessory Mounting Kit
• Includes pin and set screw
• Necessary for mounting all GT-series reaction arms and extensions
• Installation requires 1/8” hex key
• Made in USA |
